Dr. Ken Sandhage, Recent Publications (since 1998)
 
Back
  1. K. H. Sandhage, M. B. Dickerson, P. M. Huseman, M. A. Caranna, J. D. Clifton, T. A. Bull, T. J. Heibel, W. R. Overton, M. E. A. Schoenwaelder, "Reactive Conversion of Diatom Frustules: A Novel, Hybrid Route to Complex-Shaped Microstructures with Tailored Chemistries," Adv. Mater., accepted, in press.
  2. M. B. Dickerson, R. L. Snyder, and K. H. Sandhage, "Dense, Near Net-Shaped, Carbide/Refractory Metal Composites at Modest Temperatures by the Displacive Compensation of Porosity (DCP) Method," J. Am. Ceram. Soc., accepted, in press.
  3. K. H. Sandhage, N. Claussen, "Reaction Casting of Ceramic/Metal and Ceramic/Intermetallic Composites," in Handbook of Advanced Ceramics: Materials Science, Processing, and Their Applications, Academic Press, accepted, in press.
  4. K. H. Sandhage, M. B. Dickerson, P. M. Huseman, F. M. Zalar, M. R. Rondon, E. C. Sandhage, "A Novel Hybrid Route to Chemically-Tailored, Three-Dimensional Oxide Nanostructures: The BaSIC (Bioclastic and Shape-Preserving Inorganic Conversion) Process," Ceram. Eng. Sci. Proc., accepted, in press.
  5. P. J. Wurm, P. Kumar, K. D. Ralston, M. J. Mills, K. H. Sandhage, "Fabrication of Lightweight Oxide/Intermetallic Composites at 1000°C by the DCP Method," in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites V, Ceram. Trans., Ed. Narattam P. Bansal, J. P. Singh, The American Ceramic Society, Westerville, OH, 2002.
  6. P. Kumar, N. A. Travitsky, P. Beyer, K. H. Sandhage, R. Janssen, N. Claussen, "Reactive Casting of Ceramic Composites (R-3C)," Scripta Mater., 44 [5] 751-757 (2001).
  7. S. Vilayannur, K. H. Sandhage, "Selective Internal Oxidation of the Noble-Metal-Rich Intermetallic Compound, BaAg5," Oxid. Met., 55 [1,2] 87-103 (2001).
  8. M. B. Dickerson, R. L. Snyder, K. H. Sandhage, "Low-Temperature Fabrication of Dense, Near Net-Shaped Tungsten/Zirconium Carbide Composites with Tailored Phase Contents by the PRIMA-DCP Process," Ceram. Eng. Sci. Proc., 22 [4], 97-107 (2001).
  9. A. S. Litsky, K. H. Sandhage, E. Saw, S. Briggs, P. K. Gallagher, "Near Net-Shape Fabrication of Hydroxyapatite and HA-Alloy Composites," pp. 101-112 in Key Engineering Mater., Vol. 198-199, Trans. Tech. Publications, Switzerland, 2001.
  10. M. B. Dickerson, R. L. Snyder, and K. H. Sandhage, "Rapid, Low-Temperature Fabrication of Very-High-Melting ZrC/W-bearing Composites by the PRIMA-DCP Process," pp. 155-160 in Powder Materials: Current Research and Industrial Practices, Ed. F. D. S. Marquis, N. N. Thadhani, E. V. Barrera, The Minerals, Metals, and Materials Society, Warrendale, PA, 2001.
  11. P. J. Wurm, P. Kumar, K. D. Ralston, M. J. Mills, and K. H. Sandhage, "Fabrication of Dense, Lightweight, Oxide-Rich, Oxide/Aluminide Composites at 1000°C by the Displacive Compensation of Porosity (DCP) Process," pp. 129-139 in Powder Materials: Current Research and Industrial Practices, Ed. F. D. S. Marquis, N. N. Thadhani, E. V. Barrera, The Minerals, Metals, and Materials Society, Warrendale, PA, 2001.
  12. M. B. Dickerson, K. H. Sandhage, "Low-Temperature Reaction Casting of Dense, Near Net-Shaped Carbide/Refractory Metal Composites with Tailored Phase Contents," Latin Am. J. Metall. Mater., 21 [1] 18-24 (2001).
  13. K. H. Sandhage, N. Claussen, "Near Net-Shape, Oxidation-Formed Ceramics and Ceramic/Metal Composites," in The Encyclopedia of Materials Science and Technology, K. H. Jurgen Buschow, R. W. Cahn, M. C. Flemings, B. Ilschner, E. J. Kramer, S. Mahajan, Editors, Elsevier Science Publishers, New York, NY, 2001.
  14. R. Citak, M. Turker, K. H. Sandhage, "Effect of Mechanical Alloying Duration on the Microstructure in Composites Produced Via Oxidation of Ba-Al Powders," Turkish J. Eng. Environmental Sci., 25 [3] 205-210 (2001).
  15. S. Vilayannur, K. H. Sandhage, S. Dregia, "Selective External Oxidation of the Intermetallic Compound, BaAg5," J. Electrochem. Soc., 147 [7] 2805-2813 (2000).
  16. P. I. Gouma, M. J. Mills, K. H. Sandhage, "The Fabrication of Free-Standing Titania-based Gas Sensors by the Oxidation of Metallic Titanium Foils," J. Am. Ceram. Soc., 83 [4] 1007-1009 (2000).
  17. K. H. Sandhage, S. M. Allameh, P. Kumar, H. J. Schmutzler, D. Viers, X.-D. Zhang, "Near Net-Shaped, Alkaline-Earth-bearing Ceramics for Electronic and Refractory Applications via the Oxidation of Solid, Metal-bearing Precursors (the VIMOX Process)," Mater. & Manuf. Proc., 15 [1] 1-28 (2000).
  18. E. Saw, K. H. Sandhage, P. K. Gallagher, A. S. Litsky, "Near Net-Shaped Calcium Hydroxyapatite by the Oxidation of Machinable, Ca-bearing Precursors (the Volume Identical Metal Oxidation, or VIMOX, Process)," J. Am. Ceram. Soc., 83 [4] 998-1000 (2000).
  19. T. J. Detrie, K. H. Sandhage, "The Fabrication of Bi2Sr2Ca1Cu2O8±x/Ag Superconducting Tapes by the Oxidation and Post-Oxidation (Partial Melt) Annealing of Malleable, Metal-Bearing Precursors," J. Mater. Res., 15 [2] 306-316 (2000).
  20. E. Saw, K. H. Sandhage, P. K. Gallagher, A. S. Litsky, "The Fabrication of Near Net-Shaped Hydroxyapatite Ceramics by the Oxidation of Solid, Metal-bearing Precursors," Mater. & Manuf. Proc., 15 [1] 29-46 (2000).
  21. A. Jain, K. H. Sandhage, "The Fabrication of Near Net-Shaped, Refractory MgCr2O4-based Ceramics via the Volume Identical Metal Oxidation (VIMOX) Process," pp. 15-23 in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites IV, Ceram. Trans., Vol. 115, Ed. Narattam P. Bansal, J. P. Singh, The American Ceramic Society, Westerville, OH, 2000.
  22. R. Citak, M. Turker, K. H. Sandhage, "Effect of Mechanical Alloying Duration on Phase Transformation in Oxidation of Ba-Al Powders"," pp. 441-447 in Proc. Second National Powder Metallurgy Conf. with International Participation, Ankara, Turkey, Sept. 15-17, 1999, Turkish Powder Metallurgy Association, Ankara, Turkey, 2000.
  23. M. B. Dickerson, R. R. Unocic, K. T. Guerra, M. J. Timberlake, K. H. Sandhage, "The Fabrication of Dense Carbide/Refractory Metal Composites of Near Net Shape at Modest Temperatures by the PRIMA-DCP Process," pp. 25-31 in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites IV, Ceram. Trans., Vol. 115, Ed. Narattam P. Bansal, J. P. Singh, The American Ceramic Society, Westerville, OH, 2000.
  24. S. M. Allameh, K. H. Sandhage, "Fabrication of (Ba,Pb)TiO3-based Tapes with Positive Temperature Coefficients of Resistivity by the Oxidation of Malleable, Metal-bearing Precursors (the Volume Identical Metal Oxidation Process)," J. Mater. Res., 14 [11] 4319-4328 (1999).
  25. P. Kumar, K. H. Sandhage, "The Displacive Compensation of Porosity (DCP) Method for Fabricating Dense, Shaped, High-Ceramic-Bearing Bodies at Modest Temperatures," J. Mater. Sci. 34 [23] 5757-5769 (1999).
  26. P. Kumar, S. A. Dregia, K. H. Sandhage, "Epitaxial Growth of Magnesia and Spinel on Sapphire during Incongruent Reduction in Molten Magnesium," J. Mater. Res., 14 [8] 3312-3318 (1999).
  27. K. A. Rogers, P. Kumar, R. Citak, K. H. Sandhage, "The Fabrication of Dense, Shaped Ceramic/Metal Composites at ¾ 1000°C by the Displacive Compensation of Porosity Method," J. Am. Ceram. Soc., 82 [3] 757-60 (1999).
  28. R. Citak, K. A. Rogers, K. H. Sandhage, "Low Temperature Synthesis of BaAl2O4/Al Composites by the Oxidation of Solid Metal-Bearing Precursors," J. Am. Ceram. Soc., 82 [1] 237-40 (1999).
  29. D. H. Viers, K. H. Sandhage, "Near Net-Shaped (Ba,Sr)Al2Si2O8 Bodies by the Oxidation of Machinable Metal-bearing Precursors," J. Am. Ceram. Soc., 82 [1] 249-52 (1999).
  30. P. Kumar, K. H. Sandhage, "The Fabrication of Near Net-Shaped Spinel Bodies by the Oxidative Transformation of Mg/Al2O3 Precursors," J. Mater. Res., 13 [12] 3423-3435 (1998).
  31. R. B. Rogenski, K. H. Sandhage, A. L. Vasiliev, E. P. Kvam, "The Effect of Excess Neodymia on the Grain Growth of the Solid-Solution Superconductor, Nd1+xBa2-xCu3Oy," J. Mater. Res., 13 [10] 2819-2832 (1998).
  32. X. D. Zhang, K. H. Sandhage, H. L. Fraser, "Synthesis of BaAl2Si2O8 from Solid Ba-Al-Al2O3-SiO2 Precursors: III. BaAl2Si2O8 Structure after Annealing at ¾ 650°C and 1650°C," J. Mater. Res., 13 [11] 3122-3134 (1998).
  33. S. M. Allameh, K. H. Sandhage, "The Oxidative Transformation of Solid, Barium-Metal-Bearing Precursors into Monolithic Celsian with a Retention of Shape, Dimensions, and Relative Density," J. Mater. Res., 13 [5] 1271-1285 (1998).
  34. X-D. Zhang, K. H. Sandhage, H. L. Fraser, "Synthesis of BaAl2Si2O8 from Solid Ba-Al-Al2O3-SiO2 Precursors: II. TEM Analyses of Phase Evolution," J. Am. Ceram. Soc., 81 [11] 2983-97 (1998).
  35. P. Kumar, K. H. Sandhage, "Near Net-Shaped Magnesium Aluminate Spinel by the Oxidation of Solid, Magnesium-bearing Precursors," pp. 129-140 in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites II, Ceram. Trans., Vol. 94, Ed. Narattam P. Bansal, J. P. Singh, The American Ceramic Society, Westerville, OH, 1998
  36. K. A. Rogers, P. Kumar, R. Citak, K. H. Sandhage, "The Displacive Compensation of Porosity (DCP) Method for Fabricating Dense Oxide/Metal Composites at Modest Temperatures with Small dimensional Changes," pp. 141-152 in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites II, Ceram. Trans., Vol. 94, Ed. Narattam P. Bansal, J. P. Singh, The American Ceramic Society, Westerville, OH, 1998.
  37. K. A. Rogers, K. H. Sandhage, "The Effect of Transient Liquid Phase Additions on the a to b-Silicon Nitride Transformation in Celsion-Silicon Nitride Composites," Ceram. Eng. Sci. Proc., 19 [3], 113-120 (1998).
  38. K. A. Rogers, R. Citak, P. Kumar, K. H. Sandhage, "Syntheses of Alkaline Earth Aluminate/Zirconia Composites from Metal-Bearing Precursors," Ceram. Eng. Sci. Proc., 19 [4], 507-514 (1998).
  39. T. J. Detrie, K. H. Sandhage, "Formation of Bi2Sr2Ca1Cu2O8 (Bi-2212) From Metal-Bearing Precursors," pp. 93-104 in Impact of Recent Advances in the Synthesis and Processing of Ceramic Superconductors, Ed. W. Wong-Ng, U.Ballachandran, A. S. Bhalla, Ceram. Trans. Vol. 85, The American Ceramic Society, Westerville, OH, 1998.